GENERAL DESCRIPTION:

This machine is used to draw φ1.2-φ4.0mm aluminum wires from φ8mm copper wire rods. The drawing blocks are mounted in one row. The constant-speed wheel and the other 12 drawing block are driven by two motors respectively. Such design makes easy operation and change dies quickly.

MAIN CAPABILITY CHARACTERISTIC:

  • The drawing blocks rank in a horizontal row, and the cantilevers of all die holders are short and in equal length.
  • The surface of drawing blocks is coated with tungsten carbide power, which is strong in hardness and wear proof, having long life span.
  • Main drawing machine and dead-block are driven separately, and all the dies can be changed conveniently and easily.
  • Continuous dual take up, automatic reel-change, the automatic reel-change can be done at more than 99% efficiency.
  • Driven by DC motor, the imported PLC and touch screen (Siemens or Pro-face), which is convenient for the operator to set and display the parameter on the touch screen.
4

 TECHNICAL PARAMETER

Supply rod diameterØ8.0 mm
Finished wire diameterØ1.2mm – Ø4.0mm
Number of dies13
Max outlet line speed25m/s for φ1.2mm
Diameter of drawing capstanØ450 mm
Die dimensionΦ38×25mm
Take up bobbinPND500 or PND630
Main motor (CHINA)250KW(DC)
Final capstan motor (CHINA)75KW(DC)
Dual spooler with motor(2 sets) (CHINA)30KW(DC)
Annealing power70V×5000A(DC)
Install power800KW
Length of wire accumulation7 meters
Pneumatic source0.5MPa
Steam source0.2MPa
Sizes of the MachineAbout 25000 *4200*5000 (mm)

Make a
request

Send a request